<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"><channel><title>NvelopIQ blog</title><link>https://nvelopiq.com/blog</link><description>Field notes for spray foam and insulation contractors.</description><language>en-us</language><item><title>Why foam houses need smaller HVAC: Manual J after air sealing</title><link>https://nvelopiq.com/blog/manual-j-after-air-sealing</link><guid>https://nvelopiq.com/blog/manual-j-after-air-sealing</guid><pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate><description>Manual J for insulation contractors: how spray foam and a sealed attic cut the cooling load, and why rule-of-thumb sizing oversizes the HVAC.</description></item><item><title>Using REScheck to bid less foam and still pass code</title><link>https://nvelopiq.com/blog/rescheck-bid-less-foam</link><guid>https://nvelopiq.com/blog/rescheck-bid-less-foam</guid><pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate><description>How insulation contractors use REScheck UA trade-offs to find the cheapest spray foam package that still passes code, and win bids without over-spraying.</description></item><item><title>How to do a spray foam takeoff from plans (and where hand takeoffs go wrong)</title><link>https://nvelopiq.com/blog/spray-foam-takeoff-from-plans</link><guid>https://nvelopiq.com/blog/spray-foam-takeoff-from-plans</guid><pubDate>Fri, 13 Nov 2026 00:00:00 GMT</pubDate><description>A step-by-step spray foam takeoff from plans: walls, roof deck at pitch, gables, rim joists and board feet, plus the ten places hand takeoffs usually go wrong.</description></item></channel></rss>