Private beta open

Spray foam estimating software that shows its work.

Upload any plan set today: vector, scan or a phone photo. NvelopIQ measures the walls, roof deck, gables, rim joists and garage, marks every number on the plan, and builds the house in 3D. You check it, price it and bid tomorrow.

Flat price per run · Back within 24 hours · No contract

A floor plan draws itself, then tilts up into a 3D wireframe of the same house with the walls, roof deck and a gable highlighted. A-101 FLOOR PLAN SCALE 1/8" = 1'-0" 52'-0" 24'-0" 32'-0" W1 52'-0" ROOF DECK 6:12 G1 GABLE
Walls
1,512 sf @ 3.5" OC
Roof deck
1,860 sf @ 7" OC
Gables
256 sf @ 3.5" OC
Board feet
19,211 bd-ft
Example house · illustrative numbers

Proof

  • On the plan

    Every wall, roof and rim number is marked on a plan key you can check

  • 24 hrs

    Upload today, bid tomorrow. Express when you need it sooner

  • Contractor-built

    Shaped by years of real hand takeoffs from a working spray foam contractor

How it works

Upload today. Bid tomorrow.

Four steps from plan set to proposal. You stay in charge of the one that matters: the review.

  1. 01

    Upload the plan set

    Drop in the PDF. Vector plans, scanned sets and phone photos of the sheets all work. Pick the job settings once: depths, open or closed cell, garage, crawl.

  2. 02

    AI measures the house

    Walls, roof deck, gables, knee walls, garage, rim joists, walkout and basement levels, floors over crawls. No roof plan in the set? It rebuilds the roof from the elevations.

  3. 03

    You review every number

    Each line ties to the marked-up plan key and the 3D model. Change a depth or a scope rule and the totals recalculate on the spot. No re-run, no waiting.

  4. 04

    Send the bid

    Out comes a priced customer quote, an Excel workbook, the plan key PDF and a 3D model. Your customer gets a clean, simple version of the model and quote.

One upload, three jobs

Measure it, prove it passes, size the HVAC.

The takeoff comes first. Add a REScheck or HVAC sizing on the same upload. Tick any mix, each priced on its own, and nothing gets measured twice.

01 · Takeoff

Accuracy you can verify.

Every wall run, roof plane, gable and rim joist is drawn on the plan key with its length and area. Spin the 3D model and you see the same surfaces. Nothing is a black box, so you can check a number in seconds instead of re-measuring the house.

  • Walls, roof deck, gables, knee walls, garage, rim joists
  • Walkout and basement levels, floors over crawls
  • No roof plan? The roof is rebuilt from the elevations
How the takeoff works
Floor plan of the example house as uploaded, with room names and overall dimensions. 52'-0" 24'-0" BED 1OFFICEBATH / LAUNDRYLIVINGKITCHEN / DININGMUDGARAGE 9'-0" PLATE HT. TYP. • ROOF 6:12 TYP. • SLAB ON GRADE A-101 FLOOR PLAN SCALE 1/8" = 1'-0"
The same floor plan as a marked-up plan key: each wall run labelled with its length, both gables tagged, and the roof deck outlined with its area. 52'-0" 24'-0" BED 1OFFICEBATH / LAUNDRYLIVINGKITCHEN / DININGMUDGARAGE RD1 ROOF DECK 6:12 1,860 sf W1 52'-0" W2 32'-0" W3 52'-0" W4 8'-0" W5 24'-0" G1 G2 EXTERIOR WALLS GABLES ROOF DECK GARAGE WALL TO DECK
Drag to compare. Left: the plan as uploaded. Right: the plan key, with every wall run, gable and roof deck that went into the number. Example house.

02 · REScheck from $50

Win the bid with the least foam that passes.

Run a REScheck-style energy code check on the same upload, in any state. If it fails, you see the cheapest ways to pass: open cell first, depth added where it counts. You quote tighter than the crew that over-sprays "to be safe," and you still pass.

  • Compliance report plus a REScheck-Web compatible import file
  • Real assemblies: sheathing, stucco, brick, without inflating anything
REScheck for insulation contractors

REScheck, example house

Illustrative numbers
Wall foam
Roof deck foam

FAIL Envelope is 18.9% worse than code.

Foam cost
$7,718
Board feet
14,000
vs. spraying max "to be safe"
–

Simplified UA trade-off for a made-up 1,600 sf wall / 2,100 sf deck house. Example R-values per inch and $/board foot. Your products, code edition and rates go in your settings.

03 · HVAC sizing from $200

A foam house needs less tonnage. Prove it.

Load calc, equipment, ducts and registers, based on ACCA Manual J/S/D/T methods and built from the foam takeoff you already ran. Right-sized equipment means no short-cycling, no clammy rooms, no comfort callbacks, and you become the builder's whole-house performance partner.

  • Permit-style report with M-1/M-2 duct layout sheets
  • 3D duct model, from the same upload
HVAC sizing for insulation contractors

Same 2,400 sf house, three ways to size it

Illustrative, not a load calc

3.5 ton

Leaky envelope and ducts in a hot attic drive the load.

Cooling load by source, Btu/h

  • Windows 9,800
  • Air leakage 9,400
  • Ducts 8,200
  • Roof / ceiling 6,400
  • Walls 4,100
  • People + appliances 3,900

Total 41,800

The review screen

The heart of it: you check every number.

Point at a line and see it on the plan. Change a depth, a foam type or your rate, and every total updates on the spot. No re-run, no waiting on a robot.

Plan key for the example house. The highlighted item matches the line you point at in the takeoff table. 52'-0" 24'-0" BED 1OFFICEBATH / LAUNDRYLIVINGKITCHEN / DININGMUDGARAGE RD1 ROOF DECK 6:12 1,860 sf W1 52'-0" W2 32'-0" W3 52'-0" W4 8'-0" W5 24'-0" G1 G2 EXTERIOR WALLS GABLES ROOF DECK GARAGE WALL TO DECK

Takeoff

Try it: change a depth
Example takeoff lines with square feet, foam depth and board feet
ItemSq ftDepthBd-ft
W1 Exterior wall 468 in 1,638
W2 Exterior wall 288 in 1,008
W3 Exterior wall 468 in 1,638
W4 Exterior wall 72 in 252
W5 Garage wall to deck 216 in 756
G1 Gable 128 in 448
G2 Gable 128 in 448
RD1 Roof deck 6:12 1,860 in 13,020
Board feet19,208
Quote /bd-ft $9,604

Recalculated instantly. No re-run.

What you get back

Five things from one upload.

Everything you need to bid the job and show the builder why your number is right.

  • Editable takeoff

    Every line, every depth, every scope rule. Change one and the totals follow.

  • Priced customer quote

    Your $/board foot, your add-ons, your terms. Clean enough to send as is.

  • Excel workbook

    The whole takeoff in a workbook your office already knows how to use.

  • Plan key PDF

    The plan set, marked up: what was measured, where, and how big.

  • 3D model

    The house in 3D, surfaces colored by scope. Your customer gets a clean, simple version.

Pricing

One flat price per run.

Priced by heated square footage. No seats, no contract, no per-sheet fees.

Up to 2,000 sf heated

$45 per run

2,000 to 3,500 sf heated

$60 per run

3,500 to 5,000 sf heated

$80 per run

Over 5,000 sf, commercial, multifamily

Custom quote

  • Back within 24 hours. Need it sooner? Express service is available.
  • Revised plans are 50% off. The architect moved a wall? Rerun the job at half price.
  • Add-ons, priced per run: REScheck from $50, HVAC sizing from $200, Drywall and sound insulation Coming soon.

FAQ

Straight answers.

What kind of plans can I upload?

A plan set PDF. Vector PDFs from the architect work best, but scanned sets and phone photos of the sheets work too. If the set has no roof plan, the roof is rebuilt from the elevations.

What does the takeoff measure?

Exterior walls, roof deck, gables, knee walls, garage, rim joists, walkout and basement levels, and floors over crawl spaces. Every measurement is marked on the plan key and shown on the 3D model.

How do I know the numbers are right?

Every number traces back to the marked-up plan key and the 3D model, so you can check any line in seconds. Edits recalculate instantly. NvelopIQ does the measuring; you make the call. Review the takeoff before you bid, because the final numbers are yours, the same as with a hand takeoff.

Can I set my own depths and scope rules?

Yes. Depths by region, open or closed cell, rim joists, vented or sealed crawl, garage handling, metal-building waste factor and your price per board foot are all company settings, not hard-coded rules.

How much does it cost?

A flat price per run, by heated square footage: $45 up to 2,000 sf, $60 for 2,000 to 3,500 sf, $80 for 3,500 to 5,000 sf. Revised plans are half off. Houses over 5,000 sf, commercial and multifamily jobs get a custom quote.

What is the REScheck add-on?

A REScheck-style energy code check that runs on the same upload and works in every state. You get a compliance report and a REScheck-Web compatible import file. If the house fails, it shows the cheapest ways to pass, open cell first. REScheck is a U.S. Department of Energy tool; we are not affiliated with or endorsed by DOE.

Is the HVAC sizing a real Manual J?

It is based on ACCA Manual J, S, D and T methods: load calculation, equipment selection, duct design and registers. You get a permit-style report, M-1/M-2 duct layout sheets and a 3D duct model. We are not affiliated with or certified by ACCA, and your jurisdiction decides what it accepts for a permit.

Can my customer see the 3D model?

Yes. The customer-facing 3D model and quote are a clean, simplified version, without your working notes and line-by-line takeoff.

Do you do drywall or sound insulation takeoffs?

Not yet. Drywall and sound insulation takeoffs are coming soon. Join the beta and tell us you want them, and you will hear first.

Measure less. Bid more.

The private beta is open to spray foam and insulation contractors. Bring a real plan set and see what comes back.

Join the beta Sample